1

1

SERIE MIE


MAGNETIC INCREMENTAL ENCODER

  • Non-contacting measuring system
  • Easily assembling
  • 5…30 VDC Push-Pull not differential
  • High protection class IP67
  • Compact dimensions
  • For applications under possible adverse ambient conditions (vibrations, humidity, dust, etc.)

 

 
MECHANICAL SPECIFICATIONS
Materials Housing: Aluminium
Shaft: PET (Polyethylene Terephthalate)
Maximum number of revolutions permitted mechanically 12000 rpm
Shaft diameter (support of magnet) 15 mm
Shaft fixing M4
Housing fixing 2 screws M3
Permitted misalignment ±0.5mm axial, ±1mm radial
Protection against dust and splashes according to DIN EN 60529 IP67
Weight aprox. 0,3 Kg
Operating temperature range -20ºC to +85ºC
Vibration according to DIN EN 60068-2-6 100 m/s2 (10Hz…2000Hz)
Shock accoording to DIN EN 60068-2-27 1000 m/s2 (6ms)
Radial connection 2 meters cable (other cable lenghts available or connector mounted at the end of the cable, upon request)
Female connector not included

ELECTRICAL SPECIFICATIONS
Measuring range 0…360°
Resolution 1 ppr
Power supply 5…30 VDCC
Consumption < 20 mA (without load)
Reverse polarity protection of
power supply		 Yes
Magnet Ferrite
Sensor Hall

 

OUTPUT SIGNALS
Electronic Output voltage Push-Pull not differential
“High” signal level (VOH) > VCC -3 VDC
“Low” signal level < 2.5 VDC
Frequency ≤ 20 kHz
Duty cycle signal 180° ± 18°
Lenght of cable allowed 50 m
Max. load capability / channel 30 mA
Output channels A
Short circuit protection No